prober.jpeg (17539 Byte) drawing from a grain tester

you see the beam with

E = the tara weights
G = the weights
A = the bucket for the grain
C = the knife

all items have the same number
and the mark DR with the date

The balance have a handle to
fix it on a stand

 

 

 

 

prober 2.jpeg (28259 Byte)  

drawing from a grain tester
with a stand

you see the beam on a stand with

E = the bucket for the weights
D = the sliding weight for
the grain bucket
A = the bucket for the grain

all items have the same number
and the mark DR with the date

kornstutzen.jpeg (21160 Byte)  

drawing from the grain bucket

B = the tube to fill in the grain
D = the sliding weight for
the grain bucket
A = the bucket for the grain
C = the knife

all items have the same number
and the mark DR with the date

 

The grain will be filled in the tube (B),
after that, the knife (C) have to slide
out and the sliding weight (D)
falls down to the bottom of the
grain bucket (A).
The grain falls in the bucket.
The knife have to close again (s).
Now the filling tube and the
rest of the grain have to remove.
The bucket include now the grain
and the sliding weight. This all
you have to weight !!!

kornstutzen det.jpeg (15615 Byte)  

drawing from the filling tube

B = the tube to fill in the grain
R = the holes in the bottom
of the grain bucket
C = the knife

all items have the same number
and the mark DR with the date

nextpfeil_links.gif (1294 Byte)